|
The Model KMW2050 is a general purpose, UHF Power Booster for signals in the 225 to 400 MHz frequency range. No tuning, band switching, or adjustments of any kind are required to operate this unit. Maximum power output is in excess of 200 Watts into a 50 Ohm load and will provide full output power with a 2:1 maximum load VSWR. Maximum power output may be selected from the front panel to be limited to 50, 100, 150 or 200 Watts. Output power is indicated on a 10-segment bar graph. Automatic level control (ALC) maintains the maximum power output at the level selected. Power gain is a minimum 22 dB, providing for full power output with 1.5 Watts input. Input power may vary from 1.5 to 25 Watts for full output. When the input power exceeds this, an overdrive indication is given on the front panel and the amplifier reverts to the by-pass mode. Transmit/Receive switching is automatic and is initiated by an RF input power of approximately 1 Watt or greater. The unit reverts to the receive mode when the input is removed. The switching times are DAMA and HPW compatible, the unit is JITC certified. The unit is protected against excessive load VSWR and an excessive VSWR condition is indicated on the front panel. Forced-air cooling is supplied by two tube-axial fans. An over temperature indicator is provided on the front panel and the unit reverts to by-pass mode until it cools and auto restores. The antenna connection is normally made through an N-type female connector located on the rear panel. This connector may easily be relocated to the space provided for it on the front panel at any time. - Radio Vendor independent design, single and multi-band radio compatible with just an RF connection
- Full 200w across the 225 to 400 MHz band
- Low input power for full 200W output
- DAMA capable
- Compatible with 1-5 Watt and 10 -20 Watt tactical radios
- 3 year Warranty from a company with 30+ years in the business.
<< back |
