|
The Model KAW4060 is a Class AB wideband RF power amplifier system delivering in excess of 500 Watts CW power into a 50-Ohm load over the frequency range of 100 MHz to 500 MHz. Power gain is a minimum of 57 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module.
The system features forward and reflected power indication on a front panel-mounted, analog meter; Automatic Level Control (ALC); RF gain control; overdrive protection; full VSWR protection; input blanking, and over-temperature protection. On the basic model these features, plus remote power on/off control, are accessible for hard-wire remote operation through a 25-pin, D_subminiature connector. For a detailed description of these features refer to _SPECIAL FEATURES _ KAA & KAW-SERIES SINGLE BAND RF POWER AMPLIFIERS_.
The system comprises an Amplifier Unit, a Power Controller Unit and a Power Supply Unit. These are installed on telescoping slides into a standard, 19-inch equipment rack, 22 inches wide, 30 inches high, and 31 inches deep. The equipment rack is fitted with heavy-duty swivel casters. Each system component has integral forced-air cooling provided by highly reliable, impeller and/or tube-axial fans.
The Model KAW4060 uses a switching-type power supply module and operates from 187-265 VAC, 47-63 Hz line. Power consumption is 3.0 kVA maximum. The system may be placed in 'stand-by' mode with the BLANKING switch
<< back |
