AR Modular RF News

AR Modular RF's KMW2030 Amplifier System For Tactical Radios Receives Additional JITC Certification

modularrfsales@arworld.us (AR Modular RF) — Tue, 31 Jul 2012 07:05:20 EST

AR Modular RF has received JITC certification for its KMW2030 tactical radio amplifier system (30 MHz - 512 MHz / 125 watts) when used with the Harris PRC-117G tactical radio. It has been previously certified for use with the PRC 117F and the PSC-5D. The KMW2030 was tested along with its associated Low Noise SATCOM pre-amp, the KMW2030P.

This auto-band switching AM/FM-UHF/VHF DAMA amplifier uniquely fills the need for high-power tactical communications from ground vehicles, and can also be used for aircraft tactical operations. Designed for easy operation, the user need only select MODE and POWER LEVEL to operate.

The "Battle Tested" amplifier is protected against antenna mismatch, over-temperature, excessive current draw, high VSWR, and DC power mismatch.

NSWC Use of AR-50 Booster Amplifiers

modularrfsales@arworld.us (AR Modular RF) — Mon, 06 Feb 2012 11:29:57 EST

Bothell, WA — February 2, 2012 — After many months of analysis and testing the Navy Surface Warfare Center (NSWC) has chosen AR Modular RF's AR-50 tactical communications amplifier for use in a major vehicle mounted program along with the Harris PRC-117G radios. The "Battle Tested" AR-50 which was previously JITC certified for the Raytheon PSC-5D radio has recently been re-certified for use with the Harris PRC- 117G. NSWC purchased all of the amplifiers through the General Services Administration Website (GSA Contract #GS-07F-0371U).

The AR-50 booster amplifier boosts tactical radio signals from handheld and back-pack multi-band VHF/UHF tactical radio equipment employing legacy, proprietary and emerging JTRS waveforms such as AM, FM, PM, SINCGARS, HAVEQUICK, HPW, DAMA, IW, and ANW2. It provides 50 watts of output with as little as 3 watts input and offers two antenna ports dedicated to line-of-sight (LOS) or UHF Satellite (SATCOM). The system also provides a switchable SatCom low-noise amplifier (LNA) and a multi-position RF output level control. The small, compact, lightweight unit can run from either battery power or 12v or 24v vehicle power systems.

Download Data Sheet:
http://www.arww-modularrf.com/post/AR-50%20JITC%20(7-98-934-003A)_ITAR.pdf

Download Image:
http://www.arworld.us/pressReleases/110119/ar-50.jpg

AR-50 Booster Amplifier Is Now JITC Certified With PSC-5D And PRC-117G Radios

modularrfsales@arworld.us (AR Modular RF) — Thu, 12 Jan 2012 04:39:08 EST

Bothell, WA — Novermber 30, 2011 — AR Modular RF has received additional JITC Certification on it's AR-50 booster amplifier for the PRC-117G radio. Which means that the market leading 50-watt, automatic tuning, multi-band tactical booster amplifier (30 - 512 MHz) has JITC certification for use with both the PSC-5D and the PRC-117G transceivers.

The AR-50 booster amplifier boosts tactical radio signals from handheld and back-pack multi-band VHF/UHF tactical radio equipment employing legacy, proprietary and emerging JTRS waveforms. It provides 50 watts of output with as little as 3 watts input and offers two antenna ports dedicated to line-of-sight (LOS) or UHF Satellite (SATCOM). The system also provides a switchable low-noise amplifier (LNA) and a multi-position RF output level control. The small, compact, lightweight unit can run from either battery power or 12v or 24v vehicle power systems.

Download Data Sheet:
http://www.arww-modularrf.com/post/AR-50%20JITC%20(7-98-934-003A)_ITAR.pdf

Download Image:
http://www.arworld.us/pressReleases/110119/ar-50.jpg

AR Modular RF's KMW1031 Amplifier Kit On Display At Shot Show

modularrfsales@arworld.us (AR Modular RF) — Thu, 12 Jan 2012 04:32:05 EST

The Lightest 20-Watt Booster Amplifier Kit Will Be At Darley Defense and Source One Distributor's Booths

Bothell, WA — January 10, 2012 — You may have heard that AR Modular RF has created the lightest, most compact 20-watt booster amplifier kit on the market. Now you have a chance to see it in action at the 2012 SHOT Show.

The KMW1031 Amplifier Kit will be on display at two booths during the 2012 SHOT Show, January 17 – 20, Sands Expo Convention Center, Las Vegas, Nev.

Darley Defense – Booth #7003
Source One Distributors – Booth #8203

The KMW1031 Amplifier Kit includes everything needed to boost radio signals, all in one convenient package. The kit includes amplifier, 30 – 512 MHz antenna, RF cables, battery cable and tactical vest pouches for both the amp and antenna. The entire kit weighs less than 2.5 lbs.

Download Data Sheet:
http://www.arww-modularrf.com/post/KMW1031KT%20(7-98-846-913A)_ITAR.pdf

Download Image:
http://www.arworld.us/pressReleases/120110/kmw1031kit.jpg

AR Modular RF Adds New Representative For US Military Bases Through Germany-Based C2Gear

modularrfsales@arworld.us (AR Modular RF) — Tue, 17 May 2011 10:01:32 EST

AR Modular RF, maker of a wide variety of RF amplifiers, systems, and modules, has announced that Christian Domecq has joined C2Gear. For the last four years, C2Gear has represented AR Modular RF on all US Military bases in Germany and Italy. Christian Domecq will be a part of C2Gear's core sales and marketing team.

Christian enlisted in the military after high school and spent five years active duty with the US Army. He spent three years stationed in Germany and is a Desert Storm veteran. After his time in the Army, Christian spent the next 15 years in the photographic and A/V industry, eventually ending up in New York working at B&H Photo-Video-Pro Audio in their marketing department. With his background in the military, Christian became a key part of B&H's military, Government, and law-enforcement marketing team.

Christian recently made the move to Germany to help bring C2Gear to the next level.

AR Modular RF Designs Low-Profile 19-Inch Rack Mount Amplifier System

modularrfsales@arworld.us (AR Modular RF) — Thu, 10 Mar 2011 10:08:48 EST

AR Modular RF has designed a low-profile 19-inch rack system to meet the request of a military integrator that designs and deploys combat simulation training systems worldwide. The new 2RU (3.5 inches) 19-inch rack mount amplifier systems offer either 100 watts or 200 watts of power in the 220 - 245 MHz frequency range.

AR Modular RF's ability to reduce the size, weight and cost of its amplifiers at a customer's request resulted in a $200,000 order. It also demonstrates AR's ability to customize its products to meet customer specifications; and to do so quickly and cost-effectively.

AR-50 Booster Amplifier Receives JITC Certification

modularrfsales@arworld.us (AR Modular RF) — Fri, 21 Jan 2011 08:00:58 EST

AR Modular RF has received JITC Certification on it's AR-50 booster amplifier. The 50-watt, automatic tuning, multi-band tactical booster amplifier (30 - 512 MHz) has been tested and certified for conformance to applicable Military Standard (MIL-STD).

The AR-50 booster amplifier boosts tactical radio signals from handheld and back-pack transceivers operating in the 30 - 512 MHz band. It provides 50 watts output with as little as 2 watts input and offers two antenna ports dedicated to line-of-sight (LOS) or UHF Satellite (SATCOM). The system also provides a switchable low-noise amplifier (LNA) and a three-position RF output level control. The small, compact, lightweight unit can run from either 12v or 24v vehicle power systems.

Jason Kovatch Joins AR Modular RF As Test Engineer

modularrfsales@arworld.us (AR Modular RF) — Thu, 21 Oct 2010 10:01:48 EST

AR Modular RF has announced that Jason Kovatch has joined the company as a Development Engineer. His responsibilities will include creating and supporting all automated test systems as well as supporting amplifier system product development and testing.

Jason brings extensive engineering experience to his new position at AR Modular RF. He began his career as an associate at the Jet Propulsion Laboratory in Pasadena, CA, where he worked on microgravity containerless processing technology. Also while at JPL, working for the NASA Deep Space Network, he was responsible for creation of cryogenic maser amplifiers and instrumentation used for deep space probe communications and research. Jason was the Cognizant Design Engineer for Ground Microwave equipment in the Deep Space Network until 1995, at which time he moved to Hewlett Packard as a custom systems engineer. He later worked in the Signal Analysis division of Agilent Technologies until joining AR Modular RF.

In his spare time, Jason is a ham radio operator (his call is NJ7K) and he spends as much time on or near the waters of Puget Sound as he can.

VIDEO - Propagation and AR Modular RF Booster Amplifiers

modularrfsales@arworld.us (AR Modular RF) — Wed, 13 Oct 2010 08:15:37 EST

Educational Video from AR Modular showing how to extend the communication distance of modern military and civilian radios through the use of an additional booster amplifier. Knowing your terrain (trees, hills) and your communication's environment (buildings, steel structures, skyscrapers) will help you to determine how far your signal will propagate and if you need to enhance it with a Battle Tested amplifier.

AR Modular RF Introduces Enhanced Heat Sink AR-50 Tactical Booster Amplifier

modularrfsales@arworld.us (AR Modular RF) — Wed, 13 Oct 2010 08:04:47 EST

New, improved Model AR-50 (30 - 512 MHz / 50 watts) handles a higher duty cycle and has a 30% increase in thermal capability

AR Modular RF has made significant changes to its model AR-50 automatic band-switching RF booster amplifier. The newly released version of this portable lightweight booster amplifier (designed for multi-band VHF/UHF tactical radio equipment) features an enhanced heat sink, which allows for greater heat dissipation. The new design has more and larger fins that improve the unit's thermal capability by as much as 30%.

The AR-50 booster amplifier enhances tactical radio signals from handheld and back-pack transceivers operating in the 30 - 512 MHz band. It provides 50 watts output with as little as 2 watts input and offers two antenna ports dedicated to line-of-sight (LOS) or UHF Satellite (SATCOM). The system also provides a switchable low-noise amplifier (LNA) and a variable RF output level control. The small, compact unit can run from either 12v or 24v vehicle power systems. The original model AR-50, which was introduced last year, has already proven to be an invaluable tool for helping troops to maintain reliable communication even in the worst conditions and harshest environments.

AR Modular RF Supplies WiMAX Booster Amplifiers To Increase Range Of Airborne Communications

modularrfsales@arworld.us (AR Modular RF) — Mon, 04 Oct 2010 08:30:50 EST

Military planes and Law Enforcement planes flying patrols are often limited by the range of their communications equipment. When one of our NATO allies needed to extend that range they sought the expertise of AR Modular RF, a leading provider of tactical military booster amplifiers.

AR Modular RF was commissioned to create high-power WiMAX booster amplifier modules to increase the communication range of Law Enforcement Airborne Patrols. The unit provided by AR, model CMS2010M11, has a power of 50 watts and a frequency range of 2.0 to 2.5 GHz. Initial trials using this module have been reported as extremely successful in enabling patrols to fly farther without losing critical communications.

AR Modular RF Awarded $1.4 M Contract From US Navy

modularrfsales@arworld.us (AR Modular RF) — Fri, 17 Sep 2010 07:50:20 EST

AR Modular RF, one of the world's leading suppliers of tactical military booster amplifiers, has announced a contract award valued at $1.4 million to supply its tactical amplifiers to the US Navy.
The contract is part of a larger BPA (Bulk Purchase Agreement) awarded to the company earlier this year, also for AR Modular RF's proven amplifier technology. The total BPA award is valued at $5M and spans a period of 5 years.

Can A Communications Amplifier Really Extend Distance And Improve Reception For 2-Way Radios?

modularrfsales@arworld.us (AR Modular RF) — Wed, 04 Aug 2010 09:10:43 EST

A New Online Article Answers These Questions And Provides Tips For Improving Performance

AR Modular RF is the leading supplier of booster amplifiers for military tactical radios. As such, the company gets lots of questions about just how much improvement can be expected when a booster amplifier is used.

Chris Heavens, Vice President/General Manager of AR Modular RF has authored an article to answer these questions, and to explain the many factors that affect the quality and distance of two-way radio signals. The article offers an honest assessment of how a booster amplifier can affect transmission/reception quality and distance of signals. Included in the article are results of real-world testing along with tips for improving signal quality when using a portable tactical radio.

The article, entitled "Communications Amplifiers" Can They Really Take You Farther and Help You Be Heard Better," is available for free download at AR Modular RF's web site and on the RF Globalnet and Globalspec web sites.

Download Article:
http://www.arww-modularrf.com/PDFs/articles/PropagationArticleJune2010.pdf

CommTech Sales To Market AR Modular RF Products in Southwestern US

modularrfsales@arworld.us (AR Modular RF) — Fri, 30 Jul 2010 12:42:54 EST

AR Modular RF has announced an agreement with CommTech Sales in which CommTech Sales will represent AR Modular RF throughout Texas, Oklahoma, Arkansas, and Louisiana.

Established in 1996, CommTech Sales is an independent manufacturer's representative focusing on the Telecom/Commercial Wireless, Industrial, and Defense industries. The firm has over 80 years of combined technical sales & marketing experience and is known for providing customers with the best and most cost-effective solutions for their individual needs.

CommTech Sales serves its clients through two offices: the main corporate office in Plano, Texas (972-509-4900) and a field office in Houston, Texas. More information about CommTech Sales can be found at www.commtechsales.com.

AR Modular RF Names Wilko Aero-Solutions Sales Representative For South Korean Market

modularrfsales@arworld.us (AR Modular RF) — Mon, 12 Jul 2010 01:04:25 EST

AR Modular RF has announced a new relationship with Wilko Aero-Solutions Co., Ltd. of Korea. Wilko Aero will represent AR Modular RF products throughout South Korea.

Established in 2002 under the direction of Wolljoong Lee, who is retired from his service in the Korean Air Force, Wilko Aero serves the aerospace industry in both the military and commercial sectors. The company is known and respected for its technical expertise as well as for forming solid, long-lasting relationships with clients. Wilko Aero-Solutions Co. Ltd. is headquartered in South Korea with offices in Thailand and Malaysia.

Download Image:
http://www.ar-worldwide.com/pressReleases/100708/wilkoAero.jpg
Pictured from left to right are Yejin Choi (Manager, Military Project), Sabina Kang (Manager, Commercial Project), Uibin Lee (Manager, Military Project), Wolljoong Lee (President)

AR Modular RF Is Shipping New 100-Watt Amplifier System That's Only 2RU High

modularrfsales@arworld.us (AR Modular RF) — Thu, 01 Jul 2010 02:35:37 EST

New Model KAW2020M16 (100 Watts / 220 MHz - 245 MHz) is being used for simulated combat training environments

Communications Amplifiers: Can They Really Take You Farther and Help You Be Heard Better?

modularrfsales@arworld.us (AR Modular RF) — Tue, 29 Jun 2010 12:58:35 EST

By: Chris Heavens, Vice President/General Manager, AR Modular RF
As a designer and manufacturer of RF amplifiers we have always been confident in telling our customers that the more power output you have, the "better" your communications link. Just what is "better" needs defining of course; but simplistically you can either "go farther" or "be heard better," sometimes both at once, all other things being equal. The question of just how much "better" is a lot harder to quantify.

New 250-Watt Microwave System From AR Modular RF Spans 1750 - 1850 MHz Frequency Range

modularrfsales@arworld.us (AR Modular RF) — Mon, 22 Mar 2010 07:52:02 EST

AR Modular RF has introduced a new Class AB solid-state power amplifier that delivers in excess of 250 Watts CW power into a 50-Ohm load over the frequency range of 1750 MHz to 1850 MHz.

The Model KAS2010M12 is a 19-inch rack-mount unit that features overdrive protection, infinite mismatch tolerance/VSWR protection, and over-temperature protection.

Included in the the KAS2010M12 is the KMS2010 module. The KMS2010 is also available separately. It provides up to 150 watts of power over the 1.75 to 1.85 GHz frequency range.

New Vehicle-Mounted Tactical Booster Amplifier From AR Modular RF Features Auto-Tuning, Remote Control

modularrfsales@arworld.us (AR Modular RF) — Thu, 04 Feb 2010 09:50:19 EST

New Model AR-75 Delivers 75 watts Across the full 30 - 512 MHz Band

AR Modular RF Introduces 'Mini Footprint' 50-Watt Auto-Tuning Booster Amplifier For Military Transceivers

modularrfsales@arworld.us (AR Modular RF) — Fri, 30 Jan 2009 09:12:00 EST

New Model KMW1035 Covers 30 - 512 MHz Frequency Band

AR Modular RF has introduced a new portable, lightweight, fully automatic band-switching RF booster amplifier for single or multi-band VHF/UHF tactical radio equipment. The new Model KMW1035 is a 50-watt amplifier that covers the 30 - 512 MHz frequency band using six high-speed auto switching filters to assure harmonic suppression.

1 The unit is SINCGARS, HAVEQUICK, and ECCM compatible. It includes voltage spike suppression, RF sensing, T/R switching, automatic level control (ALC), six automatically switched harmonic filter bands, and protection against antenna mismatch, over-temperature and accidental polarity reversal.

The KMW1035 amplifier is the latest member of AR Modular RF's line of rugged, dependable, battle-tested military booster amplifiers.

AR Modular RF Awarded GSA Contract For Military Booster Amplifiers and Accessories

modularrfsales@arworld.us (AR Modular RF) — Fri, 11 Jul 2008 08:05:34 EST

AR Modular RF has announced the award of a five-year General Services Administration (GSA) contract to supply booster amplifiers for use with tactical military radios. The GSA schedule contract, which represents AR's continued momentum as a recognized supplier to the federal government, will make it easier for government agencies to purchase certain AR equipment.

VIDEO: An Overview of AR Modular RF Capabilities

modularrfsales@arworld.us (AR Modular RF) — Mon, 30 Jun 2008 01:39:32 EST

AR Modular RF has posted an new video which gives an overview of the company's capabilities. It is divided into the following chapters: Pt. 1: Introduction and Company Overview. Pt. 2: Rf Modules and RF Amplifier Systems For Military and Commercial Applications. Pt. 3: Military Radio Booster Amplifiers. Pt. 4: Product Engineering Capabilities and Innovations. Pt. 5: Product Engineering Capabilities and Innovations Continued (With Factory Tour)

New Orders for the Latest Version of the Proven KMW1031 20W Booster Amplifier Have Been Awarded to AR Modular RF

modularrfsales@arworld.us (AR Modular RF) — Thu, 06 Mar 2008 12:48:08 EST

AR Modular RF has taken orders and begun shipments of the latest version KMW1031 amplifier. The KMW1031 is the latest and improved version of it's popular 20W man-pack tactical radio booster amplifier. This new fully automatic version is smaller, uses the latest state of the art amplification devices such that it can be powered from one UBI-2590 or similar battery, and can be used in both 12 and 24 VDC vehicles. Like its predecessor the KMW1031 is fully submersible, with fully automatic band switching offering a minimum output of 20 watts across the full band of 30 - 512 MHz. It has automatic high speed switching of its internal filters to allow SINCGARS and other hopping modes across the full spectrum. Like both previous models it includes vehicle voltage suppression circuits, RF sensing Tx/Rx switching, and has an Automatic Leveling Control (ALC) that handles inputs from 1 to 10 Watts.

AR Modular RF Designs High-Performance Base Station Amplifier To Meet Client's Specs

modularrfsales@arworld.us (AR Modular RF) — Mon, 25 Feb 2008 08:00:00 EST

Model KAW4040M13 available in 100W and 500W versions to support modern, complex waveforms in base station applications

U.S. Army Special Operations Command Awards Amplifier Contract To AR Modular RF

modularrfsales@arworld.us (AR Modular RF) — Wed, 30 Jan 2008 07:00:00 EST

AR Modular RF has been awarded a contract to supply its new model KMW1040 multi-band amplifier to the U.S. Special Operations Command. The KMW1040 is designed as a vehicle-mounted 50 watt, 30 - 512 MHz self-tuning amplifier. It will be used as a booster amplifier in conjunction with hand-held and vehicle-mounted multi-band tactical radios such as the Harris AN/PRC-117F, the Harris AN/PRC-152, the Raytheon AN/PSC-5D, the Thales AN/PRC-148 MBITR, and other similar tactical radios.

AR Modular RF Power Amplifier Recognized As Second Most Popular Download On RF Globalnet.com

modularrfsales@arworld.us (AR Modular RF) — Fri, 18 Jan 2008 07:00:00 EST

AR Modular RF's amplifier model CMS1070 (20 watts, 3.4 - 3.7 GHz) was the second most downloaded product in 2007 of the hundreds of downloads available at RF Globalnet.com.

AR Modular RF Now Offers Full Gain Commercial Version of its Popular SATCOM Military Amplifier

modularrfsales@arworld.us (AR Modular RF) — Tue, 08 Jan 2008 09:00:00 EST

Model KMW2051 covers the 200 - 400 MHz band

AR Modular RF Designs Power Amplifier Module For Stringent VHF/UHF Analog Communications Requirements

modularrfsales@arworld.us (AR Modular RF) — Tue, 08 Jan 2008 09:00:00 EST

With so much attention being paid to emerging digital communications, it's easy to overlook the needs of those involved in analog communications. A number of companies have approached AR Modular RF for power amplifiers specifically designed to meet the strict requirements of VHF/UHF analog communications.

U.S. Army Special Operations Command Awards Amplifier Contract To AR Modular RF

modularrfsales@arworld.us (AR Modular RF) — Thu, 29 Nov 2007 08:00:00 EST

AR Modular RF has been awarded a contract to supply its new model KMW1040 multi-band amplifier to the U.S. Special Operations Command.

AR Modular RF Introduces Smaller, Tougher, Smarter Amps For Electronic Warfare

modularrfsales@arworld.us (AR Modular RF) — Wed, 07 Nov 2007 12:00:00 EST

AR Modular RF now offers an entire family of extremely compact, highly efficient, tough, durable RF power amplifiers for electronic warfare and general communications applications.

AR Modular RF Unveils Power Amplifier Module That Incorporates Transmit/Receive Switching

modularrfsales@arworld.us (AR Modular RF) — Wed, 07 Nov 2007 12:00:00 EST

AR Modular RF has created a new 50 watt RF power amplifier module that includes built-in RF sensing transmit/receive switching. Model KMW2040M13 operates in the SATCOM band of 200 - 400 MHz and is the latest member of AROs family of amplifier modules designed for the toughest, most extreme military conditions.

New RF Power Amplifier Module From AR Modular RF Covers Military Communications Band

modularrfsales@arworld.us (AR Modular RF) — Wed, 07 Nov 2007 12:00:00 EST

AR Modular RF has introduced a new RF power amplifier module that covers the VHF/UHF military communications band, from 30 to 512 MHz with a power output of 100 watts P1dB CW.